Before selecting pallet rack must first be assembled to carry out the work, is about the weight of the goods and their packaging and other characteristics of the disk group, to determine the type of tray, specifications, dimensions, as well as the occasional load of a single tray piled high (single pallet weight of goods in general in 2000kg or less), then thus determine the span, depth, spacing unit shelf, high shelf in accordance with a decision height and maximum effective height of the lower fork truck warehouse roof along. Shelf unit span is generally less than 4m, depth 1.5m or less, low, high storage shelves height generally less than 12m, high-bit storage shelf height is generally less than 30m (such warehouses are basically automated warehouse, shelf total height from several segments constitute less than 12m column).
T-Racking pallet rack is the most simple and effective storage shelves, with forklifts, Tray convenient access mode. Selective, and can be FIFO, higher inventory turnover characteristics. Widely used in the field of manufacturing, third-party logistics and distribution centers, both for many varieties of small quantities of goods, but also for large quantities of goods less variety. In addition, to improve space utilization, channel width can be reduced, with a special push orbiting exercise machine, so vertical storage space, it becomes alleys shelves.
T-Racking pallet rack basic knowledge in the design should be aware of the following main aspects:
(A) T-Racking pallet rack length design:
(1) To understand the specifications of the tray, such as cargo pallets exceeded, the excess size should be calculated.
(2) General 70-100MM interval between each design to put two trays, pallets and pallets (high shelves interval 100MM, shorter shelf can 70MM). If the length of the small tray (eg: 800MM), may be considered to put three on each tray.
(B) T-Racking pallet rack width design:
(1) To the actual size of the width of the tray is calculated.
(2) If the customer asks for cross beams, steel trays and other accessories shop, shelf width can be designed to be the same size and width of the tray.
(C) T-Racking pallet rack high degree of design:
(1) According to customer specific height warehouse space, with a forklift to raise higher factors.
(2) The height of an integer multiple of 75MM is required, if not, to take similar values.
(D) Channel: According truck performance (such as: operating channel, Yang Gao, load, etc.) to determine the forklift channels.
(E) Related accessories: columns, beams, cross beams and other accessories.
(F) Special attention factors: tray style, whether the goods are prominent shelf sizes, layer weight, space, fire, etc.
T Racking is reliable racking&shelving supplier with building thousands of high quality and cheap price warehouse racking and shelving system in all over the world.
If you have any relative inquiry, feel free to contact us:
Email: [email protected]
Mob: +86 151-5153-4802 (any time)
Tel: +86 512-67700835(office hours)
Fax: +86 512-67279156 (works all year around)
ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
Location: The following map shows our location, 1 hours driving to Shanghai