Draw-out racking refers to mold frame. The main storage of all kinds of mold materials, mold divided into light and heavy draw-out racking whose load capacity requirements based on layer. Top shelf can be configured to move the hoist car to facilitate lifting the mold.
Light draw-out racking 100 × 50mmC steel as special columns, pillars made of high quality Q235 steel mill after rolling from a one-time.
Drawer plate frame generally rectangular tube bending and 4.0 parts welded steel capped. Guide groove plate bending made using 4.0. At the top, the bottom of the crossbar connection, top shop roof, the roof can be stored items.
Heavy draw-out racking, as the overall framework, guide rails installed on the Rack column disc, the disc drawer. Usually column required not less than 90 × 70 columns.
Draw-out racking column by the column Niagara rods sheet, the guide slot is mounted above the column piece, the upper and lower beams connected with fixed, then the disc drawer in the guide groove, having a good stopper pin and the guide rail, and finally laying the roof.
As the plant no line hanging, but also set up an overhead crane above the shelf and column, and can be installed manually or electric hoists, Overhead use of not less than 100 × 50 hold welding beams.
After integral part of good black embryo by blasting rust, spray the final surface treatment, after completion can package delivery.
Draw-out racking features:
1 Assembled mainly by column sheet, a guide groove, drawer layer, rod and pins with bolts, structural stability, safety and reliability, generally use a row.
2 Drawer tray mainly by rail, drawer tray components. Drawer plate welded rectangular tube plus frame and bent parts made of steel plates. Each slide is fixed by two bearings back and forth up and down, you can freely scroll through the guide groove, low resistance, you can easily pull out the drawer.
3 Draw-out racking tray, for security reasons, the design of the pins and limit sales to ensure that the drawer tray ensure safety during extraction.
4 Draw-out racking layer contained in the light 200 ~ 800kg / layer. Heavy – shelf drawer layers contained in: 800 ~ 1500kg / layer.
5 Draw-out racking footprint, layer major, classification details, simple operation.
6 Draw-out racking can also do on disc drawer rack-shelf beams, with cost savings, more stable structure.
As a professional supermarket draw-out racking supplier, T-Racking will offer scientific and effective warehouse logistics solutions to meet your requirements .Any relative inquiries feel free to contact us:
Email: [email protected]
Mob: +86 151-5153-4802 (any time)
Tel: +86 512-67700835(office hours)
Fax: +86 512-67279156 (works all year around)
ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
Location: The following map shows our location, 1 hours driving to Shanghai