Shelves electrostatic spray process description:
1. Principle: electrostatic spray gun is in between work and was painted to form a high-voltage electrostatic field, usually work connected to the anode, gun ports for negative pressure, when the electric field strength E0 enough, the air near the muzzle which produce corona discharges ionize the air, Dang grain charged by the muzzle, become charged particles, in the corona discharge zone, and again discharge further combined with ionized air and under the influence of high voltage electrostatic field, the polarity Instead of being deposited on the coating operation of the moving surface, forming a uniform coating.
2. Features:
2.1 Coating efficiency greatly improved: Electrostatic Paint particles are adsorbed by the electric field on the work surface, a significant reduction in bulk and rebound.
2.2 Increase labor productivity.
Coating of charged particles by the electric field applied to the work piece discharge deposition and produce environmental effects are awarded on the basis of electron beam by adjusting the settings on the spray gun and spray parameters, you can obtain a uniform, smooth, plump: 2.3 to improve product quality a high-class decorative purposes.
3. Coating quality:
Painting piece performed in strict accordance with the process prescribed by degreasing, rust – washing in and – phosphate (phosphate coating thickness not less than 60μm) – washing in and – dried or dry naturally – Spray powder – drying curing (temperature 180 ℃ -200 ℃, relative humidity less than 85%) process; work piece should be uniform coating thickness shall be not less than 50 microns, the coating surface should be smooth, flat, consistent color, not allow bubbles, loss, cracking, inclusions and other impurities; impact-resistant coating strength by 50kg or surface scratch test to meet the requirements.
All product of T-Racking design and quality control has passed ISO9001: 2000 system certification, manufacture and installation of Shelves are in line with the relevant requirements and standards,Any relative inquiry feel free to contact us:
Email: [email protected]
Mob: +86 151-5153-4802 (any time)
Tel: +86 512-67700835(office hours)
Fax: +86 512-67279156 (works all year around)
ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
Location: The following map shows our location, 1 hours driving to Shanghai