Push Back Racking also known as Push In Racking, is one of the high-density storage racking systems for storing large quantities of goods less variety. The system is based on “last-out” principle of the goods placed in the tilt of the raceway, carrying trolley along the orbit, carrying a tray placed on the trolley in order to be pushed back to the shelves inside, effective depth in five pallets bits. After extracting a tray when pickup, pick up the next point and slide tray itself, effectively using a single channel access, especially for cargo transit area of storage management.
Push Back Racking has the following characteristics:
· Suitable for storage cost per unit area of the warehouse is more expensive, such as cold storage, warehouses and other prime locations downtown.
· Offers 20% -30% of the chosen property.
· Safety and operating efficiency is higher than the drive-in rack (through the shelves).
* Compared with ordinary shelves, the ground can be increased about 60% utilization.
• Only need to set Reach truck or forklift trucks can be used, and the requirements of the forklift operator (through type) is lower than the drive-in.
Push Back Racking components:
The main parts consist of column piece, beams, rails, carrying trolley and so on.
Upright Frame: There are two columns and cross bracing, bracing screw connection is made via a dedicated, cross-section of the column with the pallet rack, in order to meet different load requirements, beams can be adjusted up and down 75mm units shelves storey.
Beam: There are two post cards and beamed bar welded together. To ensure that the beams falling under abnormal external force, the special design of the beams and columns connected anti-off insurance sales, in order to ensure the safety of use.
Track: Special crafted rectangular track, in order to meet the delivery truck and continuous orbit, with a more wear-resistant galvanized.
Carrying trolley: according to the size of the tray is welded corners device special four wheels, must meet the requirements of the motion carrying goods.
As a professional storage industry warehouse racking system supplier, T Racking export a lot of logistics warehouse equipment like push back racking, pallet racking, double deep racking, Cantilever Racking, Drive In racking to South East Asia ,Middle East,North America,Europe,South America…etc. Any relative inquiry feel free to inform us at [email protected]