1, in flow through racking, the goods mainly rely on their own weight, by the high end of automatic sliding into a low end, compared with other ordinary shelves, fluent racking structure can meet the requirements of first in first out, thus can improve the work efficiency;
2, flow through racking fluent article connected directly to the front and rear beam and middle support beam, beam and other shelves directly on the pillars, fluent article installation tilt Angle usually depends on the depth of the crate size, weight, and fluent rack, fluent article roller bearing capacity is 6 kg/only.Usually every 0.6 meters installed in the depth direction a support beam to increase the stiffness of fluent article, when the race is long, available a partition to separate groove, and the need to install the brake on the pickup end piece goods to slow down, reduce the impact.
3, flow through racking, according to a different layer load has fluent in type B type fluent and heavy type shelf, fluent in type B type shelf is generally stood three or four columns, the depth of 1.2 m or 2 m, fluent and heavy duty shelving, general warehouse shelves factory mainly two columns or three stood in the majority, depth general are concentrated around 1.5 m or 2 m.
4, surface treatment using epoxy resin electrostatic spraying plastics processing, with strong corrosion, rust effect.