Mould Racking is used to put various of mold. According to loading capacity there are light mold racking and heavy mold racking. Mould racking have hoist on the top to lift the mold onto racking system.
Mold racking use No.100 channel steel or racking post to be post. Post was made from quality Q235 steel coil.
The drawer base was made from 4.0mm bending parts, guide rail and drawer was assembled with post.
Quality wheel was used to drive the drawer, the wheel can work under heavy loading up to 1000kg.
1. The structure system is reliable and safety.
2. It’s easy to handle. Mold racking use bearing parts to make slide smoothly, there can also be hoist system.
3. It help save a lot of space. Only need about 1.8 cubic meter to put 30-50 sets of mold
4. It’s good for the management of mold. The color and size can be customized.
1. Allow extra weight when calculate the loading capacity.
2. Always load the racking from bottom to top side.
3. When assemble the racking system, make sure every bolt & nuts was firmly locked. Make sure the guide rail was assembled properly.
4. Take care when load/unload the mold to racking system, operate under work guideline.
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.