Food has the warranty period , and belongs to consumer goods, the demand is bigger, so the shipment frequency will be high,so the warehouse storage shelving must meet first in first out and must be able to meet the required delivery frequency is high.

1.Drive In racking
Drive In racking is the choice of many small and medium-sized food industry, it can meet the requirements of enterprise for product first in first out, and as a developed on the basis of beam type shelf into type shelf, enterprise cost is not high,the small and medium-sized enterprises can accept it;In addition, later period, if the enterprise development, need to improve the efficiency of storage and usage, on the basis of enter type shelf, upgraded to shuttle shelving, thereby reducing the waste of cost.

2. The shuttle shelving

Shuttle shelving is no stranger to food industry, its working principle has the similarities with Drive In racking, the difference is that shuttle shelving using the shuttle car, and into type rack is still the forklift, but in the current domestic food industry, shuttle shelving because of its high cost, still turned off most enterprises.

Shuttle Racking

Heavy shelves are actually with separator and pillar of two important parts, and also by the cross beam, brace, brace and self-locking bolt, this will prevent bolt looseness shelf failure caused by unstable after the damage;And beam parts it is adopted the special cold rolling P type closed beam;And the beam structure it has light weight, low cost, simple, reliable, and the characteristics of the bearing capacity is strong;Card in column and column equipped with a specially designed safety when the connection between the pins, it is can ensure beam it under the impact of the external force will not fall off;However, it is the layer board adopted internationally do strip layer board, make it change simple, strong bearing capacity, and the characteristics of wear resistance and low maintenance cost.

heavy duty racking

Beam shelving, commonly known as loft-style shelves again, or pallet racking, as part of the pallet rack, in the domestic variety of storage shelving system is the most common form. The whole assembly, in the form of column piece + beam structure. According to the characteristics of container equipment storage, such as: gear, steel layer board (steel plate), metal mesh layer, storage cage guide rail, drum cradle and other functional accessories, can meet different unit goods stored in the form of container equipment.

In the existing loft-style shelves system works site is built on the shelf or a middle attic.

Can be done to increase the storage space, two, three floor attic, appropriate access some light foam and small and medium-sized pieces of goods, suitable for many kinds of large or multiple varieties and small batch of goods, manual access goods. The goods are usually made of forklift trucks, hydraulic lifting platform or transfer to the second floor, third floor, again by light car or hydraulic pallet truck to a particular location.
Use cold rolled steel floor more in recent years, it has the bearing capacity of strong, integral sex is good, bearing good uniformity, high precision, surface smooth, easy to lock and other advantages. There are many types of optional, and easy to match the lighting system,
Access and management more convenient. Unit shelves each layer of the load is usually within 500 kg, usually from 2.2 m to 2.2 m floor spacing, top shelf height of 2 m or so commonly, give full consideration to staff the convenience of operation.
Floor design according to various custom installation conditions, can be easily assembly at the scene, without welding. The attic shelf system in the field of auto parts, auto 4 s shop, light industry, electronics and other industries have more applications.

industry longspan shelving

Recently, the journalist from Chinese matter news network reported that, from this mouth on, the transport vehicles in Zaozhuang Shandong, must be installed GPS. The transport vehicles without GPS or the GPS cannot function well will not allow to issue or review “Road Transport Permits”, which will make the vehicles cannot be legally used on the road.

It is understood that, the “Road transport vehicle dynamic supervision and management measures” issued by The State Department of transportation, the Public Security Bureau and the National Security Agency will take effect from 1st July, 2014. According to the rules, we must load the sightseeing buses, chartered buses, more than three types of class line buses, transport vehicles for dangerous goods, heavy motor trucks and semi-trailer towing vehicles with sub-standard GPS before delivery. Because of this, the heavy motor trucks and semi-trailer towing vehicles which have already entered transport market must be installed GPS again. The functionary said that, for real time monitoring, the transport vehicles for dangerous good and passenger vehicles all had be loaded with GPS.

The functionary also said that: within the GPS, the road freight vehicles also need to access public platform, the road transportation enterprises use the monitor platform not meet the slandered, the monitor platform haven’t access the network control system, don’t upload the dynamic information of the road transport vehicles and don’t equipped with full-time monitoring personnel: all of this behaviors will be ordered to mend by the road transport management institution above the county level, if they not, they will be fined above 3000 Yuan under 8000 Yuan.

The road freight vehicle platform set a limit to monitor speeding and fatigue driving, and the transport vehicles without GPS or the GPS cannot function well will not allowed to issue or review “Road Transport Permits”, which will make the vehicles cannot be legally used on the road.

As a professional industry shelving supplier, T Racking supplier thousands of longspan shelving project to customers all over the world.

This bring good news for the manufacturer of GPS product, one of our customer is a leading brand for GPS manufacturing. Their GPS product sell well in China and Asia. They build a new warehouse for electronic components which need longspan shelving to store it.

Long span shelving

(1) Storage conditions (available height | beamed Location | Floor Conditions | fire prevention facilities)

Storage shelving to be considered in the selection of the effective height of the warehouse to determine the shelf height. The beams position will affect the shelf configuration. Floor to withstand the intensity of ground flatness also storage shelving design and installation related. Also consider installing a position yet to fire safety and lighting facilities.

(2) Item characteristics (size | Weight | Chu-digit | storage units)

The shape and size of the store items directly related to the size of the selected shelf, the weight of the items stored directly affect the selection of the strength of the shelves. The storage units, which are units of storage, or storage cage tray or a single product has different types of rack used. Another estimate the total number of digits of the reservoir, must take into account the growth of demand for the next two years. These data can be made up through the storage system analysis, but also requires us to give Proton shelves before designing some professional advice.

(3) Accessibility (storage density | FIFO | Reserve managers)

General accessibility and storage density is relative. In other words, in order to get a higher storage density, you must sacrifice the relative accessibility of items. Although some types of storage shelving get better density, but relative to its storage location management is more complex, it is often not possible control of the FIFO. Of course, the best three-dimensional automated warehouse can be up development, accessibility and storage density is superb, but the relative investment costs are more expensive. Therefore, the selection of the type of storage device, can be said to be a compromise of various factors, the application is also a strategy. Comparison of accessibility and storage density of about each type of storage device, you can call us.

(4) Handling equipment (with weight | straddle | channel width | Lifting Height | Weight Lifting | radius of gyration)

Access job is handling equipment storage equipment to complete. Therefore, the choice of storage devices need be considered handling equipment. Stacker is the general use of handling equipment, and shelves channel width, will directly affect the selection of the type stacker is with weight or narrow channel type. Various types of forklift operations compare channel width can refer to Table 1-8. Also yet to consider lifting height and weight lifting (Capacity) handling equipment comparison may refer to: forklift types and brands to buy.

(5) Into the library amount (FIFO | access frequency | access number)

Although some types of storage shelving density is well, but not high volume into and out of the warehouse, suitable for low frequency operation. The library into a high volume of data is very important, and its selection of shelf considering entry form

The development of storage warehouse brings a lot requirement of racking and shelving. T Racking is reliable racking&shelving supplier with building thousands of high quality and cheap price warehouse racking and shelving system in all over the world.

If you have any relative inquiry, feel free to contact us at [email protected]

Warehousing storage racking

1. For the channel for safekeeping. To make items out of warehousing storage convenient, easy to move in the warehouse, the basic conditions for the channel is to keep items.

2. The possible upward stacked, improve warehousing storage efficiency. Effective use of library volumes should be stacked upward, in order to prevent damage and ensure safety, it should be possible to use scaffolding and other warehousing storage devices.

3. According to the frequency of the selected location library. Shipping and receiving high frequency items should be placed near the entrance, easy-to-place job; illiquid items on a little far away from the entrance; seasonal items are placed according to their seasonal characteristics to select locations.

4. The same species kept in the same place. In order to improve operational efficiency and warehousing storage efficiency of the same items or similar items should be kept in the same place, familiarity with the staff of the library items to place a direct impact on the storage time, similar items would be placed near the place but also improve the efficiency of Important methods.

5. According to the weight of items custody arrangement position. Arranging placement options, of course, put it in the bottom heavy things to light things on the top shelf. The need for manual handling of large items places waist height as the base monkey. This security is an important principle for improving the efficiency, guaranteed.

6. The method according to the shape of the custody arrangement. Based on the shape of goods is also very important to keep, such as standard push of goods should be placed on pallets or shelves up custody.

7. According to the FIFO principle. A custody is important for perishable, easily damaged, perishable items; principles for easy function degradation, aging items, should as far as possible ancestors first-out, speed up the turnover. Due to the diversification of goods, personalized, shortening the life of Pu retreat this principle is very important.

As a professional storage shelving supplier, T-Racking will offer scientific and effective warehousing storage racking solutions to meet your requirements .Any relative inquiries feel free to contact us:

Email: [email protected]
Mob: +86 151-5153-4802 (any time)
Tel: +86 512-67700835(office hours)
Fax: +86 512-67279156 (works all year around)
ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
Location: The following map shows our location, 1 hours driving to Shanghai

Storage shelves, the phenomenon of the rusty spot is inevitable, so how to remove rust stain on the surface of the storage shelves? Below, we take a look at: remove rust stain on the surface of the storage shelves, you can use the pickling paste, can improve the surface of storage shelves, storage shelves in surface layer of the compact complete, adhesion of the passivation film, can effectively extend the service life of storage shelves, suitable for chemical machinery, food machinery, printing and dyeing machinery, pharmaceutical machinery, pressure vessel manufacturing and drying equipment, chemical equipment and chemical equipment installation and other industries use, engineering components such as surface treatment.

At the time of operating, pickling paste daub is on the surface of storage shelves, coating thickness for 0.5 2 mm, average response time is 3 – more than 10 minutes, use or scale thick place under 0 ℃, should be appropriately extended time, had better use the scrub brush a few times of treatment process, surface scale after clear, better (lime, or caustic) rinse with clear water, rust to avoid return, such as the product in water, don’t pour out, shake or stir after use.

Above for storage shelves rust cleaning method is introduced, remove the shelf surface which is rust, but not to the shelf and maintenance, or gave shelves beauty, make it more bright is dazzing. The most important thing is safety, because the shelves are used to store items, if the shelves once a rusty, iron will be rust corrosion, such storage shelves use again will be very dangerous, so we must do the following maintenance for shelf, make it last longer.

Under mobile racking is a motor driver, the scroll wheel under the shelf move along the orbit laying on the ground.So that we can improve the utilization rate of space, a set of shelves need only a single channel, the conventional fixed pallet racking channel, only used in the two rows of shelves on both sides of the channel.So in the same space, the size of the storage capacity of mobile racking is much higher than fixed shelf , and makes it move easily.

Mobile racking according to the bearing can be divided into heavy, medium and light. Light, medium, commonly used hand push to move,, heavy shelves with electric control.Usually applies to high inventory variety,  low frequent rate of the warehouse.Mobile racking often only need a channel, it can greatly improve the utilization rate of the warehouse.

The shelves are widely used in financial, food, books, etc.

Mobile Pallet Racking

Cantilever racking include single arm model and double, effective storage timber, tubes, strip and other similar products.Cantilever shelf can be made of a single unit or the post with any number of base plate, pillar and arms of continuous multiple unit system.

Composite structure, special shaped column, the design back to increase stability, with high strength cantilever (arm can be single or double), with light structure, good load capacity, high space utilization;

Added after the racks, especially suitable for the space is little, low height of warehouse, convenient management, wide vision, compared with ordinary plate racks, utilization rate is higher;

According to the bearing capacity can be divided into lightweight, medium volume type, weight type three;

Suitable for long, plank, ring material and the irregular cargo storage.

T-Racking cantilever rack