Strive to be world-class shelf supplier

Warehousing, packaging, transportation, handling, sorting, information management are the six basic functions of warehousing logistics. But shelf is the essential facilities. In the 21st century, more and more industries are ready to use storage shelves, more and more enterprises to enter the storage industry. We can say shelf is a modern industrial warehouse, logistics centers, distribution center component.

After entering 2015, become the size of a shelf industry, the world’s leading logistics companies, logistics support companies, shelf industry have also landed in China. Although the shelf industry is still in its infancy in China, but more and more local companies have begun to emerge shelf, and with the rapid development of China’s economy, the logistics industry by leaps and bounds, local businesses soar shelf has been overwhelming.

Beijing Jumeida Technology Co., Ltd. is a comprehensive technology, advanced equipment manufacturing company specializing in storage shelves. Over the years, in good faith-based philosophy, we continue to grow and develop, now has customers all over the country, becoming the northern shelf storage equipment industry pilot enterprises.

Jumeida  shelves not only the use of modern technology, the means to improve the efficiency of logistics, but also positive from the user’s point of view, with professional skills to provide proper storage solutions, customers have been highly recognized by customers more to promote logistics effective management of warehousing.

As a professional supermarket pallet racking and shelving supplier, T-Racking will offer scientific and effective warehouse logistics solutions to meet your requirements .Any relative inquiries feel free to contact us:

Email: [email protected]
Mob: +86 151-5153-4802 (any time)
Tel: +86 512-67700835(office hours)
Fax: +86 512-67279156 (works all year around)
ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
Location: The following map shows our location, 1 hours driving to Shanghai

Generally it is relatively rare that the customers choose the Narrow Aisle Racking, because it has requirements for the selection of forklift, the channel of Narrow Aisle Racking is much narrow than pallet racking, but for some enterprises,they high on Narrow Aisle Racking, because it is first-in last-out, and can put more shelving;
Narrow Aisle Racking is mainly suitable for:
1. The large amount of storage of goods, the more frequent of goods in and out and the goods have higher picking requirements;
2. Storage and logistics center in urgent need of increase storing or ask for a certain number of storage;
3. Logistics efficiency requires a higher level;
4. The clear height of warehouse is higher, more than 8 m;
5. The warehouse can choose independent warehouse forklift, don’t use warehouse forklift go outside to perform other tasks.

Narrow Aisle Racking

The industry terms about the shelves you must understand
1.Bearing weight: bearing weight is a single layer, able to bear the weight of each layer, rather than the shelves in the bearing.Bearing weight is the prerequisite of shelves design specification, it is related to the overall structure of the shelf and materials.So when purchasing goods shelves, we must first understand this problem.In addition, the weight is not the bigger the better, but according to the reasonable use requirements to custom.For example,electronics factory general product is electronic parts, more valuable, but relatively lighter, each layer not more than 300 kg weight, therefore, generally choose light shelves or medium shelf.

2,Shelf length: the length of the beam length refers to the shelves, that is the length of each set of shelves.Shelves mainly according to position products length and width.

3,Height and layers: the shelf height refers to the height of the shelves pillar.It is mainly composed of plant height, the weight of the goods and the goods is decided by the factors such as access mode.Shelves layers mainly by shelves total height and total height of the goods to decide.

shelving

Heavy shelves don’t overload:
Each layer of weight of the goods stored shall not exceed the maximum shelf design load.Heavy shelves cannot too tall or too wide: high shelves, width is restricted, card board, and the size of the goods should be slightly less than 99 mm net space.

Heavy shelves to prevent the impact:
When handling heavy goods shelves to had better not manual handling, configurable ordinary forklift, reach all sorts of model such as, three-way forklift forklift forklift.Forklift in the running process, should take put down gently.Heavy shelves shelves above have put the goods, the operator do not directly into the bottom shelf.Heavy shelves to prevent use non-standard bedplate (card board) used on the shelf, sichuan words at the end of the most suitable.

Heavy shelves must prevent top-heavy:
Should be high light cargo, the underlying principle of put heavy stuff.Shelves pillar using optimized structure and its bearing capacity is strong, beam with double beam section C, strong rigidity, the torsional resistance is good.

Heavy duty pallet racking

Heavy duty racking system adopts the roller design, tilt, appropriate use of gravity driven flow of goods, the tray with dense best physical storage and circulation, achieve fifo logistics effect, a dense storage warehouse system, the warehouse can be fully used, than the average fixed shelf warehouse utilization by about 30%. Especially suitable for the storage of goods such as breweries, food plants and all kinds of production line.

Warehouse Design and Racking

Warehouse Construction Influence to Racking is very huge. The design of warehouse racking should start when build the warehouse structure, this is the best plan to suit warehouse racking.

Usually the warehouse design is not suitable for warehouse racking, especially for the warehouse which designed 10 years ago. Warehouse racking system is not widely used that time. Such warehouse will bring trouble to the racking system when need to place pallet racking. The structure is not reasonable, which may reduce the warehouse space use rate. If customer can consider racking layout before building the warehouse, this can maximum the space use rate.

The major influence of warehouse to racking is the size & pillar location and forklift passage.

Firstly, there should be enough space for forklift passage according to minimum turning radio of forklift. Thus the pillar is very important to choose suitable space.

Secondly, the height of warehouse. The height of warehouse is determined by the height of racking system.

Third, the fire fighting passage. This is also very important. As the racking system need fire fighting certificate as a safety factor. Thus we recommend customer build auto water spray system to save space.

Last, warehouse floor and thickness of concrete. For multi tier warehouse, we should consider the loading capacity of concrete. Racking system will be fixed into ground by anchors.

If we can consider the racking system when build the warehouse, thus the space use rate and turnover rate can be maximum. As there are various of storage racking systems like selective pallet racking, drive in racking, longspan shelving, mezzanine floor, ASRS system…etc.

As a professional racking & shelving supplier, T Racking used to help customer build thousands of storage racking systems, we also help customer design their steel structure warehouse. If you have such requirement, just simply email us at [email protected] today.

T-Racking angle shelving

T-Racking angle shelving is a light shelf, using high-quality cold-rolled steel, metal forming, demolition convenient, easy to adjust, be flexible portfolio, the transformation is very strong, can be placed in response to customer requirements for changes in laminates number for optimal storage results.

T-Racking angle shelving mainly by the column, composed of steel plate suitable for human access lighter goods can be stored and plastic crates with many varieties of small pieces of products, widely used in the electronics industry and small parts warehouse, you can change the spray plastic powder or laying special rubber board to achieve anti-static function, low cost, safe, reliable, assembly, disassembly simple, and can be used alone, can also be assembled into a variety of arrangement. T so shelf stable. Steel plate according to the desired size by SPCC cold sides bending, welding strengthened form below ribs, welding spot welding, this structure has to save material, carrying the situation is good, smooth surface characteristics.

1, T-Racking angle shelving column: by punching into bilateral edge angle, hole distance of 50mm distance along the linear arrangement, post holes used to mount shelves purposes;

2, T-Racking angle shelving steel plate: Adopt a cold-rolled steel bending edges forming the desired size.

3, Column and steel plate connected to the fixed component of the shelf by the speed buckle fixed bayonet and a triangular piece.

4, After the shelves of all the parts working well polished molding, pickling, phosphate, automatic powder coating, drying, etc. Produce a finished surface of the shelves clean and beautiful; laminates can be adjusted up and down, easy disassembly.

5, Usually used for small parts, lighter cargo storage, and single load preset within the range of 150kg.

Any relative inquiry feel free to contact us:

Email: [email protected]
Mob: +86 151-5153-4802 (any time)
Tel: +86 512-67700835(office hours)
Fax: +86 512-67279156 (works all year around)
ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
Location: The following map shows our location, 1 hours driving to Shanghai

T-Racking Mezzanine Floor

Mezzanine floor, also known as laminated shelves, is to more than double the space for design utilizing a combination of, in the case of a limited area of ​​the mezzanine floor can be used for three-dimensional planning, efficient use of space. In simple terms, is the use of steel beams and sheet metal storage area for the original floor segment, each floor can be placed on different kinds of shelves, while the upper floor has a support shelf structure effect. Is a commonly used enterprise storage shelf varieties. Its platform constructed within the maximum expansion of the warehouse, storage spaces, and can be used in combination with conventional shelf, make efficient use of warehouse space for the greatest degree.

T-Racking mezzanine floor features:
1. The whole assembly structure, random combinations, installation, convenient and flexible disassembly.
2. Columns, beams, deputy section beam material optimization, strong bearing capacity.
3. The surface electrostatic powder processing, beautiful appearance.
4. According to the actual site needs flexibility to design into two or more layers resting on floor. For storing more variety, less bulk cargo, full use of space.
5. The lower is the shelf in the form of the upper platform can also be rack structure. Bottom shelf storage material is either floor support, great flexibility.
6. All shelf components in the production, the need for the last shot blasting machine blasting, rust, surface spray. Upon completion of the package can be shipped.

T-Racking mezzanine floor of use:
Shelf  of mezzanine floor design customized according to various installations can be easily assembled on site, without welding.  Mezzanine floor system in the field of auto parts, auto 4S shops, light industry, electronics and other industries have more applications.

Mezzanine floor with its double or multiple layers of unique design, make full use of the upper space of the warehouse, greatly increasing the number of storage spaces, the space utilization has a unique advantage. T-Racking mezzanine floor manufactured to high quality, safe and efficient so that our customers long-term use. Mezzanine floor need to be ordered, T-Racking is your good choice!

Any relative inquiries feel free to contact us:

Email: [email protected]
Mob: +86 151-5153-4802 (any time)
Tel: +86 512-67700835(office hours)
Fax: +86 512-67279156 (works all year around)
ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
Location: The following map shows our location, 1 hours driving to Shanghai

Whats’s the type of square tube?

T Racking not only provide finished racking & shelving product, we also supply various square tubes & steel profiles for racking & shelving manufacturer. The steel profile/square tubes are especially for racking & shelving industry. Purchase material from China, benefit from cheap cost & flexible delivery!

1)Grade: Q195-Q235,SS400,ASTM A106,

A179B .ST37, ST52

2)Size: 15×15-200x200mm,

thickness,0.8-13mm

3)Origin: China

4)Minimum Order Quantity: 25 MT

5)Payment: LC or TT.

6)Delivery: 15-45 days after TT

advance or LC at sight.

7)Packing: in bundles

8)Shipment :in containers or in bulk

We also have on sale products, which will be in cheaper price and faster delivery.

Whats’s the type of square tube?

The main truss geometry is K-type and N-type nodes. N-type K-type node node is a special case, in which a vertical webs and chords. When a single web become a Y-type node, it is a special case of Y-type nodes, its belly and chord vertical, mainly in fasting truss. Holder or concentrated loads at the X-type nodes, X-type node also appears in the cross webs and the support system. Y – joints, T-type and X-type node node node is the most basic form of truss, is to study the basis for other forms of nodes. In fact, the node type should be the nature of power transmission nodes on the way to divide, rather than simply be divided based on the node geometry.

According to the force transmission characteristics of the node, the node type can be divided into:

1. Webs axial force perpendicular to the vertical component of the balance of all the chords from the chord cross-section shear, nodes into T-type or Y-type nodes.
2. When the same flank of the lever shaft power chords located in the direction perpendicular to the chord can be self-balanced, nodes into K-type or N-type nodes.
3. When the webs chord axial force is balanced by another flank rod through, nodes into X-type nodes.As a professional supermarket racking and square tube supplier, T-Racking will offer scientific and effective warehouse logistics solutions to meet your requirements .Any relative inquiries feel free to contact us:

   Email: [email protected]
   Mob: +86 151-5153-4802 (any time)
   Tel: +86 512-67700835(office hours)
   Fax: +86 512-67279156 (works all year around)
   ADD: No.3 Fu Min Road, Xiang Cheng Industry Park,Xiang Cheng District ,Su zhou, JiangSu, China
   Office Hours: Weekdays 8:30 a.m. to 5:30 p.m. ( G.M.T+8)
   Location: The following map shows our location, 1 hours driving to Shanghai

    

In actual storage warehouse project, the design of three-dimensional library shelving – often to calculate according to the multiple relationship of 75 mm, the reason that the most of the shelving between the column and beam are used in hanging plate connection, and when the pillar manufacturing will have good connection holes in advance.

On shelving pillar of pitch, small medium-sized shelving generally is 50 mm, the heavy shelving is50 mm and 75 mm, and three-dimensional library shelving is 75 mm in the majority, in the beam can be by changing the bar of the hanging piece of welding position to the height of fine-tuning, but this will make the site installation to the corresponding installation of different beams, each layer adds difficulty to on-site installation and easy to get wrong, wrong is not easy to find and may at the stacker take put off goods such as serious consequences, so this is as far as possible in the design of the beam welding uniform beam height.
Therefore, after we confirmed the first pickup height (first layer height, not necessarily in 75 mm), starting from the second floor all the storey height is determined in accordance with the best design in multiples of 75 mm.

Pallet Racking System